Table of Contents
Austenitic Stainless steel
Austenitic Stainless steel are non-magnetic stainless steels that contain a high level of chromium & nickel with a low level of carbon content. Austenitic Stainless steel are the most widely used grade of stainless steel the most common composition is 18% Cr and 8% Ni i.e. 18/8-steels.
Austenitic Stainless steel are generally classified into two groups –the Chromium-Nickel AISI 300 series type and Chromium-\Nickel- Manganese 200 series type. Steel with better resistance to corrosion is created by adding 2-3% molybdenum, which is often called “acid-proof steel”. Grade 304 is the most common grade of this type, which typically contains 18 percent chromium and 8 percent nickel. These steels are the most popular grades of stainless steel produced because of their excellent formability, impact strength and corrosion resistance. Another reason for choosing this type of steel is high creep strength and scaling resistance. Ramdevra Metal Industries Produces all materials in this grade – Bright Round Bars, PSQ Bars, HRAP Flat Bars, Shot Blast Hexagon Bars, Bright Hexagon Bars, HR Bars & RCS, Cold Drawn Round/Flat Bar/Square Bars/Hexagon Bars, Concast Billets, Ingots.
Properties
Formability Austenitic stainless steels are generally exhibits excellent formability. In welded joints, good mechanical strength is developed without the necessity of preheating or post-weld annealing. It is advised to use heat treatment process or alternative selection of low carbon grades to prevent corrosion in the weld area. Strength at Temperature These steels are well suited to both higher service temperatures of around 600°C – or even higher if scaling resistance is the only consideration and extremely low cryogenic temperatures, depending on the load and permissible distortion. At sub-zero temperatures, some austenitic steel grades retain good ductility and impact strength. These alloys also maintain tensile and creep strength at elevated temperatures. They are used for the storage of liquefied gases at cryogenic temperatures and for heat exchangers & pollution control equipment at high temperatures.
Applications Industries
Austenitic stainless steels are used in a wide range of applications, including automotive trim, Cookware, Food and beverage equipment, Project Plant Oil and gas, Chemical, Industrial equipment etc. Applications by Grade 304 and 304L (standard grade)</strong> Used for Tanks, Storage vessels and pipes for corrosive liquids, mining, chemical, cryogenic, food and beverage, Cutlery, Architecture, Sinks, food processing, domestic sinks and tubs, pharmaceutical equipment and deep drawing applications 309 and 310 (high chrome and nickel grades) Furnace parts and equipment, kiln, and catalytic converter components. Also resistant to temperature 900°C to 1100°C. 318 and 316L (high moly content grades) Used where higher corrosion resistance is required, i.e. marine equipment, Chemical storage tanks, pressure vessels, and piping. 321 and 316Ti (“stabilized” grades) A titanium stabilized version of 316 is used where high temperature strength & good resistance to intergranular corrosion is required. Also used for super heaters, compensators & expansion bellows. 200 Series (low nickel grades) Used for Dishwashers and Washing machines, Cutlery and Cookware, In-house water tanks, Non structural architecture, Food & Beverage equipment and Automobile Parts etc.
RAMDEVRA METAL PRODUCES OVER 150 GRADES IN STAINLESS STEEL.
| ASTM | Euro Norm | JIS |
|---|---|---|
| 303 | 1.4305 | SUS 303 |
| 304 | 1.4301 | SUS 304 |
| – | 1.4306 | SUS 304L |
| 304L | 1.4307 | SUS 304L |
| 304H | 1.4948 | SUS F304H |
| 304LN | 1.4311 | SUS 304LN |
| 304N | – | – |
| 316 | 1.4401 | SUS 316 |
| 316 L | 1.4404 | SUS 316 L |
| 316 H | 1.4919 | – |
| – | 1.4432 | – |
| – | 1.4435 | – |
| 316Ti | 1.4571 | SUS 316Ti |
| 321 | 1.4541 | SUS 321 |
| 321 H | 1.4878 | SUS321H |
| 347 | 1.4550 | SUS 347 |
| 347 H | – | SUS347H |
| ASL 201 | – | – |
| ASL 202 | – | – |
| ASL 204 | – | – |
| 204 Cu | – | – |
| XM19 | – | – |
| XM 25 | – | – |
| – | 1.3952 | – |
Contact Us Address: 41/A, Chandra Bhavan, Shop No. 4, 5th Khetwadi Back Road, Mumbai, Maharashtra 400004 India. Mob: 098676 77709 Email: ramdevra@gmail.com